Check Out

Crimping - General w/Interchangeable Dies

TOOL-CF1
Standard Crimp Frame
OEM P/N: 300-054

TOOL-CF1 Standard Crimp Frame

OEM P/N: 300-054

Ratcheting design ensures consistent quality crimps
Adjustable crimp pressure
Thumbscrews to interchange dies
Size: 8.7"

TOOL-CF2
Pro-Crimp Frame
OEM P/N: 902-085

TOOL-CF2 Pro-Crimp Frame

OEM P/N: 902-085

Angled head design
Ratcheting design ensures consistent quality crimps
Adjustable crimp pressure
Thumbscrews to interchange dies
Size: 9.3"

TOOL-CASE1
Case for Crimp Frame and Dies
OEM P/N: 9BX-3018B

TOOL-CASE1 Case for Crimp Frame and Dies

OEM P/N: 9BX-3018B

Molded case holds either our Standard crimp frame or Pro-Crimp frame, and five die sets (including one in frame)

Length: 255mm/10.04in
Width: 150mm/5.90in (closed)
Height: 45mm/1.77in

Small Open Barrel Terminal "F" Crimp Die

TOOL-CDIE1
Small Open Barrel Terminal "F" Crimp Die

TOOL-CDIE1 Small Open Barrel Terminal "F" Crimp Die

For use on smaller motorcycle/automotive terminals

NOT compatible with:
- JWPF-series, JST
- SS10-series, Tyco/AMP
- MX23A-series, JAE
- MX47-series, JAE

TOOL-CDIE2
Standard Open Barrel "F" Crimp Die

TOOL-CDIE2 Standard Open Barrel "F" Crimp Die

For use on various motorcycle/automotive unsealed terminals.

NOT compatible with:
- MP150-series, Metri-Pack 150 Rear Insert type, Delphi
- MP150U-series, Metri-Pack 150 Unsealed, Delphi
- GT150.35- and GT150.45-series, GT-150 Sealed, Delphi
- MP150.2-series, Metri-Pack 150.2 Pull to seat, Delphi
- MP150P-series, Metri-Pack 150 Pull to seat, Delphi
- WP-series, Weather-Pack, Delphi
- SS10-series, Tyco/AMP Superseal 1.0
- SS15-series, Tyco/AMP Superseal 1.5
- ESJ-series, Tyco/AMP Econoseal MkII J-series
- ES3-series, Tyco/AMP Econoseal III
- JPT-series, Tyco/AMP Junior Power Timer
- KOM1-series, Bosch Kompakt
- QLW-series, Furukawa