Ring Terminals
Sumitomo
| Manufacturers | |||
|---|---|---|---|
|
|
ILR-M6
Interlocking Ring Terminals, M6
Series: Ring Terminals
Series: Ring Terminals
Commonly used as chassis grounds, these ring terminals interlock with each other as they are stacked.
- "Single stack" terminals will only lock with another terminal, and will always be either the top or bottom of the stack.
- A Single Left always starts at the bottom (against chassis). A Single Right is always the last (top of stack).
- Stacks are built up in a repeating Left - Right pattern, until a Single Right completes the stack.
- For additional grounds, "Double stack" terminals will lock with another terminal above and below it.
| Description | P/N | Wire size | Sumitomo | |
|---|---|---|---|---|
 | Single M6 Right | ILR-M6-R-1 | 0.5-2.0mm² | 20-14AWG | 8100-2006 |
| ILR-M6-R-2 | 3-5mm² | 12-10AWG | 8100-1995 | ||
 | Double M6 Left | ILR-M6-LD-1 | 0.5-0.75mm² | 20-18AWG | 8100-3479 |
| ILR-M6-LD-2 | 0.85-2mm² | 18-14AWG | 8100-3481 | ||
| ILR-M6-LD-3 | 3-5mm² | 12-10AWG | 8100-3480 | ||
 | Double M6 Right | ILR-M6-RD-1 | 0.5-0.75mm² | 20-18AWG | 8100-3476 |
| ILR-M6-RD-2 | 0.85-2mm² | 18-14AWG | 8100-3477 | ||
| ILR-M6-RD-3 | 3-5mm² | 12-10AWG | 8100-3478 | ||
 | Single M6 Left | ILR-M6-L-1 | 0.75-2.0mm² | 18-14AWG | 8100-2008 |
| ILR-M6-L-2 | 3-5mm² | 12-10AWG | 8100-1996 | ||
| Available stock: Aftermarket OEM | ||||
General
- Sealing:Unsealed
- Wire Size:0.50 - 5.00 mm2
Mechanical
- Termination:Open barrel crimp
ILR-M6-LT
Interlocking Ring Terminal - With Tab, M6
Series: Ring Terminals
Series: Ring Terminals
Left terminal with anti-rotation tab. For M6 bolts.
| Wire Size | Part Number | |
|---|---|---|
| ILR-M6-LT-1 | .50-.75 mm2 (20-18 AWG) | 8100-3639 |
| ILR-M6-LT-2 | .50-2 mm2 (20-14 AWG) | 8100-1997 |
| ILR-M6-LT-3 | 3-5 mm2 (12-10 AWG) | 8100-1998 |
| Available stock: Aftermarket OEM | ||
General
- Sealing:Unsealed
- Wire Size:0.50 - 5.00 mm2
Mechanical
- Termination:Open barrel crimp
ILR-M8
Interlocking Ring Terminals, M8
Series: Ring Terminals
Series: Ring Terminals
Commonly used as chassis grounds, these ring terminals interlock with each other as they are stacked.
- "Single stack" terminals will only lock with another terminal.
- A Single Left always starts at the bottom (against chassis). A Single Right is always the last (top of stack).
- "Double Stack" terminals not available in M8 stud size.
| Description | P/N | Wire size | Sumitomo | |
|---|---|---|---|---|
 | Single M8 Right | ILR-M8-R-1 | 0.75-2.0mm² | 18-14AWG | - |
| ILR-M8-R-2 | 3-5mm² | 12-10AWG | 8100-2001 | ||
 | Single M8 Left | ILR-M8-L-1 | 0.75-2.0mm² | 18-14AWG | - |
| ILR-M8-L-2 | 3-5mm² | 12-10AWG | - | ||
| Available stock: Aftermarket OEM | ||||
General
- Sealing:Unsealed
- Wire Size:0.75 - 5.00 mm2
Mechanical
- Termination:Open barrel crimp
© 2009-2024 Corsa Technic, LLC. All Rights Reserved. All trademarks are the property of their respective owners.
